NV25010 is 1−Kb Serial CMOS EEPROM Automotive grade device internally organized as 128x8 bits. It features a 16−byte page write buffer and support the Serial Peripheral Interface (SPI) protocol. The device is enabled through a Chip Select (CS) input. In addition, the required bus signals are clock input (SCK), data input (SI) and data output (SO) lines. The HOLD input may be used to pauseany serial communication with the NV250x0 device. The device features software and hardware write protection, including partial as well as full array protection. Byte Level On−Chip ECC (Error Correction Code) makes the device suitable for high reliability applications. The device offers an additional Identification Page which can be permanently write protected.

• Automotive Temperatures Grade0: -40°C to +150°C/VCC = 2.5V to 5.5V
• SOIC and TSSOP 8-Lead and Wettable Flank UDFN 8−pad Packages
• 10 MHz SPI Compatible
• SPI Modes (0,0) & (1,1)
• 16-byte Page Write Buffer
• Self-timed Write Cycle
• Hardware and Software Protection
• Block Write Protection
• - Protect ¼, ½ or Entire EEPROM Array
• Low Power CMOS Technology
• 100 Year Data Retention
• These Devices are Pb-Free, Halogen Free/BFR Free, and RoHS Compliant
• Additional Identification Page with Permanent Write Protection
• NV Prefix for Automotive and Other Applications Requiring Site andChange Control
• Program/Erase Cycles:− 4,000,000 at 25°C− 1,200,000 at +85°C− 600,000 at +125°C− 300,000 at +150°C