The NCV7710 is a powerful Driver-IC for automotive body control systems. The IC is designed to control lock motor in the door of a vehicle. With the monolithic full-bridge driver stage, the IC is able to control lock motor. The NCV7710 is controlled thru a 24 bit SPI interface with in-frame response.

• Operating Range from 5.5 V to 28 V
• Two High-Side and Two Low-Side Drivers Connected as Halfbridges
• - 2 Half−bridges Iload = 6 A; Rdson = 150 mΩ @ 25°C
• Programmable Soft-start Function to Drive Loads with Higher Inrush Currents as Current Limitation Value
• Support of PWM Control Frequency Outside the Audible Noise
• Support of Active Freewheeling to Reduce Power Dissipation
• Multiplex Current Sense Analog Output for Advanced Load Monitoring
• Very Low Current Consumption in Standby Mode
• Charge Pump Output to Control an External Reverse Polarity Protection MOSFET
• 24-Bit SPI Interface for Output Control and Diagnostic
• Protection Against Short Circuit, Overvoltage and Overtemperature
• Downwards Pin-to-pin and SPI Registers Compatible with NCV7707