NCP1075A
Enhanced Off line Switcher for Robust and Highly Efficient Power Supplies
制造商:ON
产品信息
The NCP1075A & NCP1075B products integrate a fixed frequency current mode controller with a 700 V MOSFET. Available in a two different pin out of the very common PDIP 7 package, it offers a high level of integration, including soft start, frequency jittering, short circuit protection, skip cycle, a maximum peak current set point, ramp compensation, and a dynamic self supply (DSS, eliminating the need for an auxiliary winding).
Unlike other monolithic solutions, the NCP1075A & NCP1075B is quiet by nature: during nominal load operation, the part switches at one of the available frequencies (65 or 100 kHz). When the output power demand diminishes, the IC automatically enters frequency foldback mode and provides excellent efficiency at light loads. When the power demand reduces further, it enters into a skip mode to reduce the standby consumption down to a no load condition.
Protection features include: a timer to detect an overload or a short circuit event, Over voltage Protection with auto recovery. Ac input line voltage detection prevents lethal runaway in low input voltage conditions (Brown-out) as well as too high an input line (Ac line Over voltage Protection). This also allows an Over power Protection to compensate all internal delays in high input voltage conditions and optimize the maximum output current capability.
For improved standby performance, the connection of an auxiliary winding stops the DSS operation and helps to reduce input power consumption below 50 mW at high line.
Unlike other monolithic solutions, the NCP1075A & NCP1075B is quiet by nature: during nominal load operation, the part switches at one of the available frequencies (65 or 100 kHz). When the output power demand diminishes, the IC automatically enters frequency foldback mode and provides excellent efficiency at light loads. When the power demand reduces further, it enters into a skip mode to reduce the standby consumption down to a no load condition.
Protection features include: a timer to detect an overload or a short circuit event, Over voltage Protection with auto recovery. Ac input line voltage detection prevents lethal runaway in low input voltage conditions (Brown-out) as well as too high an input line (Ac line Over voltage Protection). This also allows an Over power Protection to compensate all internal delays in high input voltage conditions and optimize the maximum output current capability.
For improved standby performance, the connection of an auxiliary winding stops the DSS operation and helps to reduce input power consumption below 50 mW at high line.
- Integrated 700 V MOSFET with RDS(on) of 13.5 Ω
- Current-Mode Fixed Frequency Operation (65 & 100 kHz) - 130 kHz for B version only
- Peak Current: NCP1075A/B = 400 mA
- Skip-Cycle Operation at Low Peak Current
- Dynamic Self-Supply (DSS)
- Auto-Recovery Output Short Circuit Protection with Timer-Based Detection
- Frequency Foldback Operation
- 300 µA No Load Power Consumption
- Frequency Jittering (including during frequency foldback mode)
- Adjustable Brown-out Protection and OVP
- Over Power Protection
- 2nd Level Current Protection
在线购买
型号:NCP1075BAP100G
描述:-
型号:NCP1075BAP065G
描述:-
型号:NCP1075AAP100G
描述:-
型号:NCP1075AAP065G
描述:-
型号:NCP1075BAP130G
描述:-
技术资料
应用案例
深入解析NCP3126:3A同步PWM开关转换器的设计与应用
2026-04-14
深入解析 Onsemi NCP302155A:集成驱动与 MOSFET 的卓越之选
2026-06-08
ADM1075 迷你评估套件使用指南
2026-05-28
深入解析 NCP81239 和 NCP81239A USB 功率传输控制器
2026-06-02
Onsemi NCP107x系列高压开关芯片:低功耗离线SMPS的理想之选
2026-06-01
深入解析Onsemi NCP107xuz系列离线开关器:特性、应用与设计要点
2026-06-01
NCP5386,NCP5386A,NCP5386B应用电路
2008-10-23
高精度低功耗温度传感器TMP1075:性能与应用全解析
2026-02-12
