NB3RL02
Clock Fanout Buffer, 2-Channel, Low Phase Noise
制造商:ON
产品信息
The NB3RL02 is a low-skew, low jitter 1:2 clock fan-out buffer, ideal for use in portable end-equipment, such as mobile phones. With integrated LDO and output control circuitry. The MCLK_IN pin has an AC coupling capacitor and will directly accept a square or sine wave clock input, such as a temperature compensated crystal oscillator (TCXO). The minimum acceptable input amplitude of the sine wave is 300 mV peak-to-peak. The two clock outputs are enabled by control inputs CLK_REQ1 and CLK_REQ2. The NB3RL02 has an integrated Low-Drop-Out (LDO) voltage regulator which accepts input voltages from 2.3 V to 5.5 V and outputs 1.8 V at Iout = 50 mA. This 1.8 V supply is externally available to provide regulated power to peripheral devices, such as a TCXO. The adaptive clock output buffers offer controlled slew-rate over a wide capacitive loading range which minimizes EMI emissions, maintains signal integrity, and minimizes ringing caused by signal reflections on the clock distribution lines. The NB3RL02 is offered in a 0.4 mm pitch wafer-level-chip-scale (WLCS) package (0.77 mm x 1.57 mm) and is optimized for very low standby current consumption.
- Low Additive Noise: -149 dBc/Hz at 10 kHz Offset Phase Noise
- Regulated 1.8 V Output Supply Available for External Clock Source,
- ie. TCX0
- Ultra-Small Package: 8-ball: 0.4 mm Pitch WLCS (0.77 mm x 1.57 mm)
- ESD Performance Exceeds JESD 22: 2000 V Human Body Model
在线购买
型号:NB3RL02FCT2G
描述:-
应用案例
三星Galaxy A02和Galaxy M02手机已通过蓝牙SIG权威认证
2021-02-04
02:了解Layerscape计算和加速功能如何满足当今的需求
2019-01-14
ELCL从设备选择引脚功能(4线SPI)教程 [2] 配置项目RL78/G23
2023-06-07
采用 RL78/G13 开发板控制DIY MP3所有功能测试
2018-06-15
借助NB-IoT和SARA-N3降低监测应用设备总体功耗
2023-11-29
给GoKit3装一块N102 在家就能体验NB-IoT开发
2019-05-04
RL78/F24 CANFD参考例程
2024-06-17
物联网卡和nb卡之间的区别是怎样的
2022-06-09