NB100LVEP221
20 Differential, HSTL / ECL / PECL, 2.5 V / 3.3 V
制造商:ON
产品信息
The NB100LVEP221 is a low skew 2:1:20 differential driver, designed with clock distribution in mind, accepting two clock sources into an input multiplexer. The two clock inputs are differential ECL/PECL; CLK1/CLK1bar can also receive HSTL signal levels. The LVPECL input signals can be either differential or single-ended (if the V
output is used).
The LVEP221 specifically guarantees low output-to-output skew. Optimal design, layout, and processing minimize skew within a device and from device to device.
To ensure tightest skew, both sides of differential outputs should be terminated identically into 50 ohms even if only one output is being used. If an output pair is unused, both outputs may be left open (unterminated) without affecting skew.
The NB100LVEP221, as with most other ECL devices, can be operated from a positive V
supply in LVPECL mode. This allows the LVEP221 to be used for high performance clock distribution in +3.3 V or +2.5 V systems. In a PECL environment, series or Thevenin line terminations are typically used as they require no additional power supplies. For more information on PECL terminations, designers should refer to Application Note AND8020/D.
The V
pin, an internally generated voltage supply, is available to this device only. For single-ended LVPECL input conditions, the unused differential input is connected to V
as a switching reference voltage. V
may also rebias AC coupled inputs. When used, decouple V
and V
via a 0.01 uF capacitor and limit current sourcing or sinking to 0.5 mA. When not used, V
should be left open.
Single-ended CLK input operation is limited to V
>/= 3.0 V in LVPECL mode, or V
= -3.0 V in NECL mode.
output is used).
The LVEP221 specifically guarantees low output-to-output skew. Optimal design, layout, and processing minimize skew within a device and from device to device.
To ensure tightest skew, both sides of differential outputs should be terminated identically into 50 ohms even if only one output is being used. If an output pair is unused, both outputs may be left open (unterminated) without affecting skew.
The NB100LVEP221, as with most other ECL devices, can be operated from a positive V
supply in LVPECL mode. This allows the LVEP221 to be used for high performance clock distribution in +3.3 V or +2.5 V systems. In a PECL environment, series or Thevenin line terminations are typically used as they require no additional power supplies. For more information on PECL terminations, designers should refer to Application Note AND8020/D.
The V
pin, an internally generated voltage supply, is available to this device only. For single-ended LVPECL input conditions, the unused differential input is connected to V
as a switching reference voltage. V
may also rebias AC coupled inputs. When used, decouple V
and V
via a 0.01 uF capacitor and limit current sourcing or sinking to 0.5 mA. When not used, V
should be left open.
Single-ended CLK input operation is limited to V
>/= 3.0 V in LVPECL mode, or V
= -3.0 V in NECL mode.
- 15 ps Typical Output-to-Output Skew
- 40 ps Typical Device-to-Device Skew
- Jitter Less than 2 ps RMS
- Maximum Frequency > 1.0 Ghz Typical
- V
- Output
- 540 ps Typical Propagation Delay
- LVPECL and HSTL Mode Operating Range: V
- = 2.375 V to 3.8 V with V
- = 0 V
- NECL Mode Operating Range: V
- = 0 V with V
- = -2.375 V to -3.8 V
- Q Output will Default Low with Inputs Open or at V
电路图、引脚图和封装图
技术资料
应用案例
NB-100,200型逆变电源电路 (国外电源电路)
2008-11-03
全球各地商用网络达100张 NB-IoT大规模商用势头无法阻挡
2018-06-25
爱立信南京工厂成功部署了第1000个NB-IoT终端应用
2018-05-12
适合LED固定装置的固态驱动器LXMG221W-070003
2010-06-29
nb-iot技术原理
2020-11-25
中国联通将建100万个L900+1800双频基站
2018-02-24
从应用角度对NB-IoT进行分析研究,归纳出了NB-IoT应用架构
2018-07-26
华为OceanConnect IOT平台总经理王强:2019年中期NB-IoT市场将迎来规模爆发期
2018-08-03