MC100E116

 ECL Quint Differential Line Receiver

制造商:ON

中文资料及数据手册

在线购买

产品信息

The MC10E/100E116 is a quint differential line receiver with emitter-follower outputs. For applications which require bandwidths greater than that of the E116, the E416 device may be of interest.
Active current sources plus a deep collector feature of the MOSAIC III process provide the receivers with excellent common-mode noise rejection. Each receiver has a dedicated V
supply lead, providing optimum symmetry and stability.
If both inverting and non-inverting inputs are at an equal potential of > -2.5 V, the receiver does not go to a defined state, but rather current-shares in normal differential amplifier fashion, producing output voltage levels midway between HIGH and LOW, or the device may even oscillate.
The V
pin, an internally generated voltage supply, is available to this device only. For single-ended input conditions, the unused differential input is connected to V
as a switching reference voltage. V
may also rebias AC coupled inputs. When used, decouple V
and VCC via a 0.01 F capacitor and limit current sourcing or sinking to 0.5 mA. When not used, V
should be left open.
The 100 Series contains temperature compensation.
  • 500ps Max. Propagation Delay
  • V
  • Supply Output
  • Dedicated V
  • Pin for Each Receiver
  • PECL Mode Operating Range: V
  • = 4.2 V to 5.7 V with V
  • = 0 V
  • NECL Mode Operating Range: V
  • = 0 V with V
  • = -4.2 V to -5.7 V
  • Output Q
  • will default low when inputs are
  • Internal Input Pulldown Resistors
  • Meets or Exceeds JEDEC Spec EIA/JESD78 IC Latchup Test
  • ESD Protection: > 2 KV HBM, > 200 V MM
  • Moisture Sensitivity Level 1
  • For Additional Information, see Application Note AND8003/D
  • Flammability Rating: UL-94 code V-0 @ 1/8", Oxygen Index 28 to 34
  • Transistor Count = 98 devices
  • Pb-Free Packages are Available

电路图、引脚图和封装图

    MC100E116电路图

    在线购买

    技术资料

    应用案例