LAN9250

LAN9250 -10/100 Industrial Ethernet Controller & PHY

制造商:

产品信息

The LAN9250 is a full-featured, single-chip 10/100 Ethernet controller designed for embedded applications where performance,flexibility, ease of integration and system cost control are required. The LAN9250 has been specifically designed to provide high performance and throughput for 16-bit applications. The LAN9250 complies with the IEEE802.3 (full/half-duplex 10BASE-T and 100BASE-TX) Ethernet protocol, IEEE 802.3az Energy Efficient Ethernet (EEE)(100Mbps only), and the IEEE 1588v2 precision time protocol. 100BASE-FX is supported via an external fiber transceiver.

The LAN9250 includes an integrated Ethernet MAC and PHY with a high-performance SRAM-like slave interface. For additional design flexibility SPI and SQI interfaces are also supported. The integrated checksum offload engines enable the automatic generation of the 16-bit checksum for received and transmitted Ethernet frames, offloading the task from the CPU. The LAN9250 also includes large transmit and receive data FIFOs to accommodate high latency applications. In addition, the LAN9250 memory buffer architecture allows highly efficient use of memory resources by optimizing packet granularity. The LAN9250 also supports features which reduce or eliminate packet loss. The internal 16-KByte SRAM can hold over 200 received packets. If the receive FIFO gets too full, the LAN9250 can automatically generate flow control packets to the remote node, or assert back-pressure on the remote node by generating network collisions.

The LAN9250 can be configured to operate via a single 3.3V supply utilizing an integrated 3.3V to 1.2V linear regulator.The linear regulator may be optionally disabled, allowing usage of a high efficiency external regulator for lower system power dissipation

Microchip's complimentary and confidential LANCheck® online design review services are available for customers who have selected our products for their application design-in*.

*The  is subject to Microchip's  and requires a myMicrochip account.

  16-bit 10/100 industrial Ethernet controller & PHY

  Interfaces to most 8/16-bit embedded controllers

  Also 32-bit embedded controllers with an 8/16-bit bus

  Also supports SPI/SQI 

  Integrated Ethernet PHY with HP Auto-MDIX

  Integrated Ethernet MAC

  Compliant with Energy Efficient Ethernet 802.3az

  Wake on LAN (WoL) support

  Integrated IEEE 1588v2 hardware time stamp unit

  Cable diagnostic support

  1.8V to 3.3V variable voltage I/O

  Integrated 1.2V regulator for single 3.3V operation

  Low pin count and small body size package

    LAN9250封装图

    在线购买

    技术资料

    应用案例