LAN9116
10Base-T/100Base-TX Ethernet Controller with 16/32 bit interface
制造商:
产品信息
Please consider this device
The LAN9116 is a full-featured, single-chip 10/100 Ethernet controller designed for embedded applications where performance, flexibility, ease of integration and system cost control are required. The LAN9116 has been architected to provide the best price-performance ratio for any 32-bit application with medium-high performance requirements. The LAN9116 is fully IEEE 802.3 10BASE-T and 802.3u 100BASE-TX compliant.
The LAN9116 includes an integrated Ethernet MAC and PHY with a high-performance SRAM-like slave interface. The simple, yet highly functional host bus interface provides a glue-less connection to most common 16-bit and 32-bit microprocessors and microcontrollers. The LAN9116 includes large transmit and receive data FIFOs to accommodate bandwidth-intensive and high latency applications. In addition, the LAN9116 memory buffer architecture allows the most efficient use of memory resources by optimizing packet granularity.
The EEPROM device from Microchip comes with a factory programmed, globally unique EUI-48™ MAC Address. This Ethernet controller will automatically detect and load the EUI-48™ node address from the EEPROM at start-up or reset.*Theservice is subject to Microchip'sand requires a myMicrochip account.
Highlights
Member of LAN9118 Family; optimized for medium-high performance applications
Easily interfaces to most 32-bit and 16-bit embedded CPU's
Efficient architecture with low CPU overhead
Integrated PHY
Supports audio & video streaming over Ethernet: 1-2 high-definition (HD) MPEG2 streams
Medium-high speed member of LAN9118 Family (all members are pin-compatible)
Target Applications
Medium-range Cable, satellite, and IP set-top boxes
Digital video recorders and DVD recorders/players
High definition televisions
Digital media clients/servers and home gateways
Video-over IP solutions, IP PBX & video phones
Wireless routers & access points
Key Benefits
Non-PCI Ethernet controller for medium-high performance applications
32-bit interface
Burst-mode read support
Eliminates dropped packets
Internal buffer memory can store over 200 packets
Supports automatic or host-triggered PAUSE and back-pressure flow control
Minimizes CPU overhead
Supports Slave-DMA
Interrupt Pin with Programmable Hold-off timer
Reduces system cost and increases design flexibility
SRAM-like interface easily interfaces to most Embedded CPU's or SoC's
Low-cost, low-pin count non-PCI interface for embedded designs
Reduced-Power Modes
Numerous power management modes
Wake on LAN*
Magic packet wakeup*
Wakeup indicator event signal
Link Status Change
Single chip Ethernet controller
Fully compliant with IEEE 802.3/802.3u standards
Integrated Ethernet MAC and PHY
10BASE-T and 100BASE-TX support
Full- and Half-duplex support
Full-duplex flow control
Backpressure for half-duplex flow control
Preamble generation and removal
Automatic 32-bit CRC generation and checking
Automatic payload padding and pad removal
Loop-back modes
Flexible address filtering modes
One 48-bit perfect address
64 hash-filtered multicast addresses
Pass all multicast
Promiscuous mode
Inverse filtering
Pass all incoming with status report
Disable reception of broadcast packets
Integrated Ethernet PHY
Auto-negotiation
Automatic polarity detection and correction
High-Performance host bus interface
Simple, SRAM-like interface
32/16-bit data bus
Large, 16Kbyte FIFO memory that can be allocated to RX or TX functions
One configurable host interrupt
Miscellaneous features
Low profile 100-pin, TQFP RoHS Compliant package
Integral 1.8V regulator
General Purpose Timer
Support for optional EEPROM
Support for 3 status LEDs multiplexed with Programmable GPIO signals
3.3V Power Supply with 5V tolerant I/O
0° to 70°C
*Third-party brands and names are the property of their respective owners
在线购买
型号:LAN9116-MT
描述:-