HV9805
Off-Line LED Driver with True DC Output Current
制造商:
产品信息
The HV9805 driver IC is targeted at general LED lighting products, such as LED lamps and LED lighting fixtures with a maximum power rating of about 25W at 120VAC and about 50W at 230VAC.
A two-stage topology provides true constant current drive for the LED load while drawing mains power with high power factor. The first stage, a boundary conduction mode boost converter, transfers power from the AC line to a second stage with high power factor and high efficiency. The second stage, a linear regulator arranged for operation with low overhead voltage, transfers power from the first stage to the LED load with true constant current and protects the LED load from overvoltage that may pass from mains to the output of the first stage.
The IC is particularly geared to drive a high voltage LED load. An LED load arranged as a high voltage load is capable of offering cost advantages in terms of heat management and optics.
The boost converter employs a cascode switch for high-speed switching and convenient generation of the VDD supply. The control device of the cascode switch is an integral part of the HV9805 and is rated at 700 mA. Current for powering the VDD supply is derived by way of an internal connection to the cascode switch.
Applications with low output voltage can be accommodated by the SEPIC topology.
Provides True DC Light and protects load from line voltage transients
Driver topology includes:
Boundary Conduction Mode (BCM) Boost Converter with Power Factor Correction
High Power Factor(98%+)
High Efficiency (90%+)
Linear Post-Regulator with Low Overhead Voltage
Zero LED Current/Brightness Ripple
Overvoltage Protection for LEDs
High Efficiency
±4% Reference over Temperature
Simple VDD Supply:
No Auxiliary Winding Required
Boost Converter Cascode Switch:
Internal Switch rated at 700 mA peak
Supports up to 25W at 120VAC
Supports up to 50W at 230VAC
Compatibility with SEPIC Topology for Low Output Voltage Applications
在线购买
型号:HV9805MG-G
描述:-