EMC2106

EMC2106 Dual fan controller with 1 linear, 1 PWM, 5 temperature sensors, higher frequency support, look up table, I2C, 3 alerts

制造商:

产品信息

The EMC2106 is an SMBus compliant fan controller with up to five (up to 4 external and 1 internal) temperature channels. The fan drivers can be operated using two methods each with two modes. The methods include an RPM based Fan Speed Control Algorithm and a direct drive setting. The modes include manually programming the desired settings or using the internal programmable temperature look-up table to select the desired setting based on measured temperature.

The temperature monitors offer 1°C accuracy (for external diodes) with sophisticated features to reduce errors introduced by series resistance and beta variation of substrate thermal diode transistors commonly found in processors.

The EMC2106 also includes a hardware programmable temperature limits and dedicated system shutdown output for thermal protection of critical circuitry.

Features

  Two Programmable Fan Control circuits

  4-wire fan compatible

  High speed PWM (26khz)

  Low speed PWM (9.5Hz - 2240Hz)

  600mA, 5V, High Side Fan Driver

  Optional fan aging detection

  1mA Linear DAC Fan Driver

  RPM based fan control algorithm

  2% accuracy from 500RPM to 16k RPM

  Temperature Look-Up Table

  Allows programmed fan response to temperature

  1 to 4 thermal zones to control each fan driver

  Controls fan speed or fan drive setting

  Allows externally generated temperature data to control fan drivers including two DTS channels

  Up to Four External Temperature Channels

  Designed to support 45nm, 60nm, and 90nm CPUs

  Automatically detects and supports CPUs requiring the BJT or Transistor models

  Resistance error correction

  1°C accurate (60°C to 100°C)

  0.125°C resolution

  Detects fan aging and variation

  Three dedicated comparator outputs for External Diode 1, External Diode 2, and External Diode 3 (OVERT1#, OVERT2#, OVERT3#)

  Up to three thermistor compatible voltage inputs

  Hardware Programmable Thermal Shutdown Temperature

  Cannot be altered by software

  60°C to 122°C Range or 92°C to 154°C Range

  Programmable High and Low Limits for all channels

  3.3V Supply Voltage

  SMBus 2.0 Compliant

  2 selectable SMBus addresses

  SMBus Alert compatible

  Option to load register set from external EEPROM

  Available in 28-pin QFN package - RoHS compliant (5mm x 5mm)

Applications

  Notebook Computers

  Embedded Applications

  Projectors

  Industrial and Networking Equipment

    EMC2106封装图

    在线购买

    应用案例