The CAT6202 is a 13 V rated 500 mA CMOS low dropout regulator that provides fast response time to load current and line voltage changes in an automotive environment.
CAT6202 features a low R
P-channel pass element with internal control circuitry which prevents reverse current flow should the voltage at V
exceed V
as in the case of the car's battery voltage accidentally being applied to V
.
Thermal protection and current limiting circuitry combine to protect the pass device against faults and abuse. Current limiting is user controlled through a single resistor to ground. A fault output (
) provides an alert should an over-current event or thermal shutdown occur.
CAT6202 comes on-line gracefully even though it may be driving heavy capacitive loads thanks to built-in soft-start circuitry. Its output is protected against accidental connection to voltages greater than V
and will not conduct current backwards into its supply.
CAT6202 is available in 8-pad 2 mm x 3 mm TDFN package.

• Guaranteed 500 mA Continuous Output Current
• Low Dropout Voltage of 250 mV Typical at 500 mA
• Input Voltage Range: 3.3 V to 13.5 V
• User Adjustable Output Voltage
• User Programmable Current Limit
• Fault Output to Indicate Under-voltage, Current Limiting or Thermal Shutdown has Occurred
• Fault Blanking: 3 ms
• V
• Withstands Battery Fault Voltages of up to 14 V
• Soft-Start Prevents Current Surges
• Stable with Ceramic Output Capacitor
• ±1.0% Output Voltage Initial Accuracy
• ±2.0% Accuracy Over Temperature
• Thermal Protection
• 8 Pad TDFN Package
• hese Devices are Pb-Free, Halogen Free/BFR Free and are RoHS Compliant