CAT1027
CPU Supervisor with 2 k EEPROM Memory
制造商:ON
产品信息
The CAT1027 is a complete memory and supervisory solution for microcontroller-based systems. A 2 k-bit serial EEPROM memory and a system power supervisor with brown-out protection are integrated together in low power CMOS technology. Memory interface is via a 400 kHz I²C bus.
The CAT1027 provides a precision V
sense circuit with five reset threshold voltage options that support 5.0 V, 3.3 V and 3.0 V systems. The power supply monitor and reset circuit protects memory and systems controllers during power up/down and against brownout conditions. If power supply voltages are out of tolerance reset signals become active preventing the system microcontroller, ASIC, or peripherals from operating.
CAT1027 has only a
output. In addition, the
pin can be used as an input for push-button manual reset capability.
The CAT1027 provides an auxiliary voltage sensor input, V
, which is used to monitor a second system supply. The auxiliary high impedance comparator drives the open drain output, V
, whenever the sense voltage is below 1.25 V threshold.
The CAT1027 is designed with a 1.6 second watchdog timer circuit that resets a system to a known state if software or a hardware glitch halts or 'hangs' the system. The CAT1027 features a watchdog timer interrupt input, WDI.
The on-chip 2 k-bit EEPROM memory features a 16-byte page. In addition, hardware data protection is provided by a V
sense circuit that prevents writes to memory whenever V
falls below the reset threshold or until V
reaches the reset threshold during power up.
Available packages include an 8-pin DIP, 8-pin SOIC, 8-pin TSSOP, 8-pin TDFN and 8-pin MSOP. The TDFN package thickness is 0.8 mm maximum. TDFN footprint is 3x3 mm.
The CAT1027 provides a precision V
sense circuit with five reset threshold voltage options that support 5.0 V, 3.3 V and 3.0 V systems. The power supply monitor and reset circuit protects memory and systems controllers during power up/down and against brownout conditions. If power supply voltages are out of tolerance reset signals become active preventing the system microcontroller, ASIC, or peripherals from operating.
CAT1027 has only a
output. In addition, the
pin can be used as an input for push-button manual reset capability.
The CAT1027 provides an auxiliary voltage sensor input, V
, which is used to monitor a second system supply. The auxiliary high impedance comparator drives the open drain output, V
, whenever the sense voltage is below 1.25 V threshold.
The CAT1027 is designed with a 1.6 second watchdog timer circuit that resets a system to a known state if software or a hardware glitch halts or 'hangs' the system. The CAT1027 features a watchdog timer interrupt input, WDI.
The on-chip 2 k-bit EEPROM memory features a 16-byte page. In addition, hardware data protection is provided by a V
sense circuit that prevents writes to memory whenever V
falls below the reset threshold or until V
reaches the reset threshold during power up.
Available packages include an 8-pin DIP, 8-pin SOIC, 8-pin TSSOP, 8-pin TDFN and 8-pin MSOP. The TDFN package thickness is 0.8 mm maximum. TDFN footprint is 3x3 mm.
- Precision V
- power supply voltage supervisor
- 5.0 V, 3.3 V and 3.0 V systems
- Five threshold voltage options
- Additional voltage monitoring
- — Externally adjustable down to 1.25 V
- Watchdog timer
- Active high or low reset
- — Valid reset guaranteed to V
- = 1 V
- 400 kHz I²C bus
- 3.0 V to 5.5 V operation
- Low power CMOS technology
- 16-Byte page write buffer
- Built-in inadvertent write protection
- 1,000,000 Program/Erase cycles
- Manual reset capability
- 100 year data retention
- 8-pin DIP, SOIC, TSSOP, MSOP or TDFN
- (3 x 3 mm foot-print) packages
- — TDFN max height is 0.8mm
- Industrial and extended temperature ranges
在线购买
型号:CAT1027LI-45-G
描述:-
型号:CAT1027LI-25-G
描述:-
型号:CAT1027LI-42-G
描述:-
型号:CAT1027LI-30-G
描述:-
型号:CAT1027LI-28-G
描述:-
型号:CAT1027ZI-45-GT3
描述:-