90E24

90E24

制造商:

中文资料及数据手册

    在线购买

    产品信息

    The 90E24 is a high-performance energy metering device for single-phase two-wire, single-phase three-wire or anti-tampering active and reactive energy meters. With the measurement function, the 90E24 can also be used in power instruments which need to measure voltage, current, etc.

      Fully compliant with IEC standard IEC62052-11, IEC62053-21 and IEC62053-23

      Applicable to class 1 or class 2 single-phase watt-hour meter or class 2 single-phase var-hour meter

      Accuracy of 0.1% for active energy and 0.2% for reactive energy over a dynamic range of 5000:1

      Temperature coefficient is 15ppm/°C (typical) for on-chip reference voltage

      Electrical parameters measurement: less than ±0.5% fiducial error for Vrms, Irms, mean active/reactive/apparent power, frequency, power factor and phase angle

      Dedicated ADC and different gains for L line and N line current sampling circuits

      Current sampled over shunt resistor or current transformer (CT)

      Voltage sampled over resistor divider network or potential transformer (PT)

      Programmable L line and N line metering modes

      Anti-tampering mode (larger power)

      L line mode (fixed L line)

      L+N mode (applicable for single-phase three-wire system)

      Flexible mode (configure through register)

      Voltage channel (when gain is '1'): 120µVrms~600mVrms

      L line current channel (when gain is '24'): 5µVrms~25mVrms

      N line current channel (when gain is '1'): 120µVrms~600mVrms

    应用案例